S212B-10雙層玻璃反應釜應用：

雙層反應器內層放反應溶媒，可作攪拌反應加熱，可通上不同的冷熱源（冷凍液、水貨熱油）做循環加熱或冷卻反應。在設定恒溫條件下，根據使用要求在常壓或負壓條件下進行攪拌反應，并能做反應溶液的蒸餾、回流或收集。

Purpose:
The double-decked reactor inner layer puts the response solvent, may make the agitation response heating, on the passable different cold heat source （refrigerating fluid, parallel import hot oil） make the hydronic heating or the cooling response. In establishes under the constant temperature condition, carries on the agitation according to the operation requirements under the atmospheric pressure or the negative pressure condition to respond that ａnd can make the response solution the distillation, the backflow or the collection.

S212B-10雙層玻璃反應釜特點：

1. 變頻調速交流感應電機，轉速恒定、無電刷、無火花、可連續工作、
2. 玻璃夾層接口熱油經過循環，可作加熱反應，通上冷凍液，可進行低溫反應。
3. 可在常溫下反應，通上自來水即可，能快速將反應熱量帶走。
4. 四氟閥門下放料口，可拆卸便于固體物料出料。
5. 四口反應器蓋，特大口設計，便于清洗，可選擇組裝回流、蒸餾、收集等合成裝置。
6. 整體不銹鋼框架結構，使用操作方便，可整機移動，穩定性好。
1. The frequency conversion velocity modulation exchange asynchronous machine, the rotational speed constant, does not have the electronics brush, sparklessly, to be possible the continuous working,
2. The glass band connection hot oil after the circulation, may make the heating to respond that passes the refrigerating fluid, may carry on the low temperature response.
3. May respond under the normal temperature that passes the running water then, can fast respond that the quantity of heat carries off.
4. Four fluorine valves release the material mouth, is advantageous for the solid material to leave the material dismantable.
5. Four reactor lids, the especially big mouth design, is advantageous for the clean, may choose synthesizers ａnd so on assembly backflow, distillation, collection.
6. Overall stainless steel portal frame construction, use ease of operation, but the complete machine migration, the stability is good.